Lined Valves Manufacturers

KHD Valves Automation Pvt Ltd is a High Quality Lined Valves Manufacturer in Mumbai, Maharashtra, India. We are a leading manufacturer of Lined Valves in Mumbai and nearby areas. Our Lined Valves are manufactured according to International ASTM ANSI Standards, ASTM API Standards, ASTM DIN Standards in India. Mail us for Easy and Quick Quotes at Factory Prices.

Lined Valves Manufacturers:- Product Description

We KHD Valves Automation Pvt Ltd are renowned in the market for performing Lining in different type of Valves. We perform PTFE Lining in Ball Valves, Butterfly Valves, Check Valves, Plug Valves.

Lined Valves Manufacturers:- Types Of Lined Valves

Ball Valves manufacturers

Lined Ball Valves

A Ball Valve is a form of quarter-turn Valves which uses a hollow, perforated and pivoting Ball to control flow through it.

Butterfly Valves manufacturers

Lined Butterfly Valves

A Butterfly Valve is a Valves that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.

Gate Valves manufacturers

Lined Gate Valves

A Gate Valve, also known as a sluice valve, is a Valves which opens by lifting a round or rectangular gate/wedge out of the path of the fluid.

Globe Valves manufacturers

Lined Globe Valves

A Globe Valve, different from other Valves, is a type of Valves used for regulating flow in a pipeline.

Check Valves manufacturers

Lined Check Valves

A Check Valve is a Valves that normally allows fluid to flow through it in only one direction.

Strainer Valves manufacturers

Lined Strainer Valves

Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element.

Safety Valves manufacturers

Lined Safety Valves

A Safety Valve is a Valves that acts as a fail-safe. An example of Safety Valves is a pressure relief valve, which automatically releases a substance from a boiler.

Foot Valves manufacturers

Lined Foot Valves

Foot Valves are a type of Check Valves and are placed at the pump’s wet well. Unlike other valves, aFoot Valves is created with a larger flow area.

Diaphragm Valves manufacturers

Lined Diaphragm Valves

Diaphragm Valves consists of a Valves body with two or more ports, a diaphragm, and a "weir or saddle" or seat upon which the Diaphragm closes the valve.

Pressure Reducing Valves manufacturers

Lined Pressure Reducing Valves

A pressure regulator is a control Valves that reduces the input pressure of a fluid to a desired value at its output.

Needle Valves manufacturers

Lined Needle Valves

A Needle Valve is a type of Valves having a small port and a threaded, Needle-shaped plunger. It allows precise regulation of flow.

Plug Valves manufacturers

Lined Plug Valves

Plug Valves are Valves with cylindrical or conically tapered "plugs" which can be rotated inside the Valves body to control.

Flush Bottom Valves manufacturers

Lined Flush Bottom Valves

Flush bottom Valves are used to discharge Liquids from the bottom of Reactors andhuge Tanks. Flush Bottom Valves are available in design of Disc opening into the Tank.

Jacketed Valves manufacturers

Lined Jacketed Valves

Heating Jackets are required where the process temperature must be maintained through the Valves in order to keep the process media fluid.

Sight Glass manufacturersPinch Valves manufacturing

Lined Sight Glass

A Sight Glass or water gauge is a type of level sensor, a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within.

Pinch Valves manufacturing

Lined Pinch Valves

A Pinch Valve is a full bore or fully ported type of control Valves which uses a Pinching effect to obstruct fluid flow.

Lined Valves Manufacturers:- Materials

  • Bronze (CAC401, CAC406)
  • Brass (C3771)
  • Gray cast iron (FC200,FC300)
  • Ductile iron castings (FCD-S)
  • Carbon steel castings for high temperature/pressure service (SCPH 2)
  • Stainless steel castings (SCS13A,SCS14A)

Lined Valves Manufacturers:- Characteristics

Lined Valves are hard wearing, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and Globe Valves, but they lack their fine control in throttling applications.

Lined Valves Manufacturers:- Uses

KHD Valves Automation Pvt Ltd's Lined valve's ease of operation, repair, and adaptability lend it to extensive industrial use, withstanding pressures up to 1000 bar and temperatures up to 752 °F (400 °C), depending on design and raw materials used. Sizes typically range from 0.2 to 48 inches (0.5 cm to 121 cm). Valve bodies are made of metal, plastic, or metal with a ceramic; floating balls are often chrome plated for durability. One disadvantage of a Lined valve is that they trap water in the center cavity while in the closed position. In the cold climates, the sides can crack due to the expansion of ice forming. Some means of insulation or heat tape in this situation will usually prevent damage. Another option for this situation is the "freeze tolerant Lined valve". This style of Lined valve incorporates a freeze plug in the side so in the event of a freeze up, the freeze plug ruptures (acts as a sacrificial disk), thus making for an easy repair. Now instead of replacing the whole valve, just screw in a new freeze plug.

Lined Valves Manufacturers:- KHD Valves Automation Pvt Ltd

KHD Valves Automation Pvt Ltd mainly manufactures Industrial Lined Valves. Each and every Lined valve passes through stringent quality control tests at every stage of production and each valve is made perfect in every respect. Optimum quality of raw material is used for manufacturing. Each Lined valve is tested on In-house Modern facilities as per latest Indian / International Standards for Hydraulic and Pneumatic Testing. Standardization of Lined Valves components manufacturing is done which ensures easy interchangeability and hence maintenance becomes most easy and quick.

KHD Valves Automation Pvt Ltd is the best in business and world Leading dealers of Lined Valves.

Choose KHD Valves Automation Pvt Ltd for optimum quality Valves that are made with high grade steel which is globally approved with Best Service in the business.

We manufacture Valves from a genuine guaranteed raw material with a material test certificate, hydraulic test certificates, Mill TC 3.1.b available with all supply.

Valve supplier in India, we supply valves to the following countries in India
Bengaluru Mumbai Chennai Hyderabad Kolkata Pune
New Delhi Ahmedabad Jaipur Surat Salem Gandhinagar
Bhiwandi Tiruppur Sivakasi Jamnagar Thiruvananthapuram Rajahmundry
Bhubaneswar Vijaywada Firozabad Bokaro Steel City Rajkot Bharuch
Panna Raipur Cochin Ludhiana Panipat Durgapur
Peenya Pimpri-Chinchwad Channapatna Kharagpur Nashik Bareilly
Varanasi Haldia Rourkela Bangalore Moradabad Indore
Visakhapatnam Trivandrum Pithampur Dibrugarh Angul Gwalior
Coimbatore Kannur Nagpur Vadodara Rudrapur Noida
Agra Bhagalpur Jamshedpur Bhilai Lucknow kanpur
Thane Bhopal


Send your Inquiry

Contact Us

Security Question - What is 4 + 2 ?


Valves in India